检查下列包是否安装，若未安装则要先安装：
rpm -qa | grep binutils-
rpm -qa | grep compat-libstdc++-
rpm -qa | grep elfutils-libelf-
rpm -qa | grep elfutils-libelf-devel-
rpm -qa | grep glibc-
rpm -qa | grep glibc-common-
rpm -qa | grep glibc-devel-
rpm -qa | grep gcc-
rpm -qa | grep gcc-c++-
rpm -qa | grep libaio-
rpm -qa | grep libaio-devel-
rpm -qa | grep libgcc-
rpm -qa | grep libstdc++-
rpm -qa | grep libstdc++-devel-
rpm -qa | grep make-
rpm -qa | grep sysstat-
rpm -qa | grep unixODBC-
rpm -qa | grep unixODBC-devel-
binutils-2.17.50.0.6-2.el5
compat-libstdc++-33-3.2.3-61
elfutils-libelf-0.125-3.el5
elfutils-libelf-devel-0.125
glibc-2.5-12
glibc-common-2.5-12
glibc-devel-2.5-12
gcc-4.1.1-52
gcc-c++-4.1.1-52
libaio-0.3.106
libaio-devel-0.3.106
libgcc-4.1.1-52
libstdc++-4.1.1
libstdc++-devel-4.1.1-52.e15
make-3.81-1.1
sysstat-7.0.0
unixODBC-2.2.11
unixODBC-devel-2.2.11
# rpm -qa | grep make gcc glibc compat openmotif21 setarch 等等
建议你用 rpm –q packagename 逐个检查，因为是官方要求，所以为了不在安装时出现不必要的麻烦，还是确认都全部安装为好。
虽然我是全新安装的系统也存在 3 个包没安装：Libaio-devel numactl-devel sysstat
挂载 Linux 5 光盘，查找包的完整路径名称：
[root@localhost ~]# mkdir /media/cdrom ; mount /dev/cdrom /media/cdrom
[root@localhost ~]# ll /media/cdrom/Server/ |grep libaio-devel
[root@localhost ~]# ll /media/cdrom/Server/ |grep numactl-devel
[root@localhost ~]# ll /media/cdrom/Server/ |grep sysstat
安装 RPM 包：
[root@localhost ~]# rpm -ivh /media/cdrom/Server/libaio-devel-0.3.106-3.2.i386.rpm
[root@localhost ~]# rpm -ivh /media/cdrom/Server/numactl-devel-0.9.8-7.el5.i386.rpm
[root@localhost ~]# rpm -ivh /media/cdrom/Server/sysstat-7.0.2-3.el5.i386.rpm
rpm -ivh compat-libstdc++-33-3.2.3-69.el6.i686.rpm --force --nodeps
[root@localhost RHEL_6.5 x86_64 Disc 1]# pwd
/media/RHEL_6.5 x86_64 Disc 1
[root@localhost RHEL_6.5 x86_64 Disc 1]#
另外，为了支持 ODBC 建议顺便安装下面两个包：
unixODBC-2.2.11 (32 bit) or later
unixODBC-devel-2.2.11 (32 bit) or later
-
修改主机名
永久生效：
[root@zijuan /]#vim /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=yes
HOSTNAME=zijuan
HOSTNAME=zijuan表示主机设置为zijuan.
注意：修改主机名后，需要重启系统后生效，或者切换个用户然后切换回来就OK
查看/etc/hosts文件中必须包含a fully qualified name for the server
[root@localhost lhr]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.128.131 rhel6_linux_asm
[root@localhost lhr]# hostname
localhost.localdomain
[root@localhost lhr]# hostname rhel6.5_linux
[root@localhost lhr]# hostname
rhel6_linux_asm
修改/etc/hosts文件
[root@oracle ~]#vim/etc/hosts
127.0.0.1 localhost.localdomainlocalhost
::1 localhost6.localdomain6localhost6
192.168.137.112 oracle.domain.comoracle
注意将主机名对应到真实ip地址，否则oracle有可能将监听程序仅仅建立在127.0.0.1上
-
网络配置
如果要配置em的话，这里最后把系统的ip地址设置成静态的ip地址，不然可能导致em访问的时候改变了数据库服务器的ip地址，从而导致其它问题的出现，具体静态ip地址配置参考( o()︿))o 唉。。。。这一块内容还没有写博客，大家可以百度或者私聊我)
-
磁盘准备
这里我们准备5块硬盘
1块硬盘安装操作系统
234块用于实现ASM 存储数据
5块硬盘用于存储FRA
-
添加磁盘
1.1.编辑虚拟机配置
.jpg)
1.2.添加硬件
1.3.添加第一块硬盘
1.4.创建新的虚拟磁盘
1.5.选择磁盘类型
1.6.设置磁盘大小
1.7.完成
1.8.
添加第二、三、四、五块磁盘：重复步骤 1~7
1.9.
.jpg)
这里5块磁盘添加完毕后，为了避免后边再重启一次，可以先把后边需要的一个步骤做了，就是找到虚拟机的配置文件，在最后添加一行disk.EnableUUID="TRUE"，这里注意修改文件的时候一定要在关机的状态下修改该参数文件。
-
对磁盘进行分区
磁盘添加完成后，启动虚拟机，作为 root用户登录系统，格式化新添加的两块磁盘。
[root@localhost share]# fdisk -l | grep "Disk /dev/sd"
Disk /dev/sde: 10.7 GB, 10737418240 bytes
Disk /dev/sdd: 10.7 GB, 10737418240 bytes
Disk /dev/sda: 53.7 GB, 53687091200 bytes
Disk /dev/sdb: 10.7 GB, 10737418240 bytes
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
磁盘分区完成后，查看所有磁盘情况。
注意这里只做磁盘的分区，并不做磁盘的格式化和挂载
-
配置目录、用户等
-
配置用户及用户组
利用 /usr/sbin/groupadd 命令
------这里Oracle用户可能已经安装过的，没有影响：
代码：
groupadd oinstall
groupadd dba
groupadd oper
groupadd asmadmin
groupadd asmoper
groupadd asmdba
--添加用户到组
useradd -g oinstall -G dba,asmdba,oper,asmadmin oracle
useradd -g oinstall -G asmadmin,asmdba,asmoper,dba grid
--修改密码
passwd oracle
passwd grid
echo oracle | passwd --stdin lhr
echo grid | passwd --stdin lhr
---查看属主
[root@rhel_linux_asm ~]# id oracle
uid=501(oracle) gid=502(dba) groups=502(dba),501(oinstall),504(asmadmin),506(asmdba)
[root@rhel_linux_asm ~]# id grid
uid=502(grid) gid=501(oinstall) groups=501(oinstall),502(dba),504(asmadmin),505(asmoper),506(asmdba)
[root@rhel_linux_asm ~]#
-
创建目录并且配置 grid 和 oracle 用户的配置文件
代码：
--root用户下：
mkdir -p /u01/app/oracle
mkdir -p /u01/app/grid
mkdir -p /u01/app/grid/11.2.0
chown -R grid:oinstall /u01/app/grid --把/u01/app/grid的所有者改为grid
chown -R oracle:oinstall /u01/app/oracle
chmod -R 775 /u01
--------Oracle User----切换到Oracle用户下------
[root@rhel_linux_asm ~]# su - oracle
[grid@rhel_linux_asm ~]$ vi ~/.bash_profile
export ORACLE_SID=orcl
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export TMP=/tmp
export TMPDIR=$TMP
export PATH=$PATH:$ORACLE_HOME/bin
--------Grid User-----切换到grid用户下-----
cd /home/grid
vim .bash_profile
export ORACLE_SID=+ASM
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/grid/11.2.0
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:$PATH
umask 022
[oracle@dbserver1 ~]$ source .bash_profile
-
使用udev管理磁盘
-
配置 udev 绑定的 scsi_id
注意以下两点：
首先切换到root用户下：
5.1.不同的操作系统，scsi_id命令的位置不同。
[root@localhost ~]# cat /etc/issue
Oracle Linux Server release 6.4
Kernel \r on an \m
[root@localhost ~]# which scsi_id
/sbin/scsi_id
[root@localhost ~]#
5.2.编辑 /etc/scsi_id.config文件，如果该文件不存在，则创建该文件并添加如下行：
[root@localhost ~]# vi /etc/scsi_id.config
options=--whitelisted --replace-whitespace
[root@localhost ~]#
5.3.如果是使用 VMware虚拟机，直接输入 scsi_id命令可能无法获取 id，需修改 VMware文件参数，这一步如果在添加磁盘的时候做过这一步的话就可以跳过了，直接获取uuid即可
[root@localhost ~]# scsi_id --whitelisted --replace-whitespace --device=/dev/sdb
[root@localhost ~]# scsi_id --whitelisted --replace-whitespace --device=/dev/sdc
D:\VMs\Oracle Database 11gR2\Oracle Database 11gR2.vmx
使用文本编辑器编辑该文件，在尾部新增一行参数：
disk.EnableUUID="TRUE"
保存文件，重新启动虚拟机。这里注意修改文件的时候一定要在关机的状态下修改，或者 scsi_id -g -u /dev/sdc来获得uuid，-g -u参数在rhel6以后已经不用了
[root@localhost share]# scsi_id --whitelisted --replace-whitespace --device=/dev/sdb
36000c29fbe57659626ee89b4fba07616
[root@localhost share]# scsi_id --whitelisted --replace-whitespace --device=/dev/sdc
36000c29384cde894e087e5f0fcaa80f4
[root@localhost share]# scsi_id --whitelisted --replace-whitespace --device=/dev/sdd
36000c29022aee23728231ed9b1f9743d
[root@localhost share]# scsi_id --whitelisted --replace-whitespace --device=/dev/sde
36000c2938f431664218d1d2632ff1352
-
创建并配置 udev rules 文件
[root@localhost ~]# vi /etc/udev/rules.d/99-oracle-asmdevices.rules
KERNEL=="sd*", SUBSYSTEM=="block", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name",RESULT=="36000c29fe0fc917d7e9982742a28ce7c", NAME="asm-diskb", OWNER="grid",GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", SUBSYSTEM=="block", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name",RESULT=="36000c293ffc0900fd932348de4b6baf8", NAME="asm-diskc", OWNER="grid",GROUP="asmadmin", MODE="0660"
根据步骤 5 获取的 ID 修改 RESULT 值
这里需要注意，一个KERNEL就是一行，不能换行的，我之前就是犯了这个错误的
添加4块硬盘：
KERNEL=="sd*", SUBSYSTEM=="block", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name",RESULT=="36000c29346c1344ffb26f0e5603d519e", NAME="asm-diskb", OWNER="grid",GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", SUBSYSTEM=="block", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name",RESULT=="36000c29d08ee059a345571054517cd03", NAME="asm-diskc", OWNER="grid",GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", SUBSYSTEM=="block", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name",RESULT=="36000c295037a910bfb765af8f400aa07", NAME="asm-diskd", OWNER="grid",GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", SUBSYSTEM=="block", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name",RESULT=="36000c2982bda048f642acd3c429ec983", NAME="asm-diske", OWNER="grid",GROUP="asmadmin", MODE="0660"
注意：这里的GROUP="asmadmin", 最好修改成GROUP="asmdba"，不然最后可能用dbca创建数据库实例的时候找不见磁盘组。
-
添加完成后，重启 udev，不同 Linux 发行版本重启方式不一样。
该步骤慢一点，大约可能需要30秒左右吧，等等等等。。。。。。
[root@localhost ~]# start_udev
Starting udev: [ OK ]
[root@localhost ~]#
-
查看绑定的 asm，如果此时还是看不到 asm disk，请重启操作系统后再查看。
[root@localhost ~]# ll /dev/asm*
brw-rw---- 1 grid asmadmin 8, 17 Oct 17 14:26 /dev/asm-diskb
brw-rw---- 1 grid asmadmin 8, 33 Oct 17 14:26 /dev/asm-diskc
-
系统内核参数修改
-
编辑 /etc/security/limits.conf 文件，在文件尾部添加如下内容：
[root@localhost ~]# tail -8 /etc/security/limits.conf
# add by lhr for oracle and grid on 2014-05-02
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
grid soft nproc 2047
grid hard nproc 16384
grid soft nofile 1024
grid hard nofile 65536
-
编辑 /etc/pam.d/login 文件，在文件尾部添加如下内容：
[root@localhost ~]# tail -1 /etc/pam.d/login
session required pam_limis.so
[root@localhost ~]#
-
编辑 /etc/profile 文件，设置 shell 限制，在文件尾部添加如下内容：
[root@localhost ~]# tail -9 /etc/profile
if [ /$USER = "oracle" ] || [ /$USER = "grid" ]; then
if [ /$SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
umask 022
fi
-
/etc/sysctl.conf
Configuring Kernel Parameters for Linux
vim /etc/sysctl.conf
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 4294967295
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
生效
# /sbin/sysctl -p
-
安装grid
-
通过 ZMODEM 上传文件 linux.x64_11gR2_grid.zip 至grid用户家目录 /home/grid/
这步当然也可以使用其它软件来替代上传软件包：
[root@localhost ~]# ll /home/grid/
total 1028228
-rw-r--r-- 1 root root 1052897657 Oct 16 13:22 linux.x64_11gR2_grid.zip
[root@localhost ~]#
-
解压文件
[root@localhost grid]# unzip linux.x64_11gR2_grid.zip
[root@localhost grid]# ll
total 1028232
drwxr-xr-x 8 root root 4096 Aug 21 2009 grid
-rw-r--r-- 1 root root 1052897657 Oct 16 13:22 linux.x64_11gR2_grid.zip
[root@localhost grid]#
-
作为 grid 用户登录系统，执行安装程序。
-
日志
安装过程中的日志生成地址：
/u01/app/oraInventory/logs/installActions2014-06-14_10-32-53PM.log
16.1.检查安装脚本是否具有可执行权限
[grid@localhost grid]$ id
uid=501(grid) gid=500(oinstall) groups=500(oinstall),501(dba),503(asmadmin),504(asmoper),505(asmdba)
[grid@localhost grid]$ ll runInstaller
-rwxr-xr-x 1 root root 3227 Aug 15 2009 runInstaller
[grid@localhost grid]$
如果无可执行权限，执行以下命令进行授权：
[root@localhost ~]# chown -R grid:oinstall /home/grid/grid/
[root@localhost ~]# ll /home/grid/grid/runInstaller
-rwxr-xr-x 1 grid oinstall 3227 Aug 15 2009 /home/grid/grid/runInstaller
[root@localhost ~]#
16.2. 执行安装脚本 /home/grid/grid/runInstaller
首先打开Xmanager - Passive软件，然后在 Xshell会话设置如下：
[grid@rhel_linux_asm grid]$ clear
[grid@rhel_linux_asm grid]$ export DISPLAY=192.168.1.100:0.0---这里的ip地址就是本机的ip地址(ipconfig)
[grid@rhel_linux_asm grid]$ xhost +
access control disabled, clients can connect from any host
[grid@rhel_linux_asm grid]$ ls
doc install response rpm runcluvfy.sh runInstaller sshsetup stage welcome.html
[grid@rhel_linux_asm grid]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 31642 MB Passed
Checking swap space: must be greater than 150 MB. Actual 383 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-04-29_10-53-18PM. Please wait ...[grid@rhel_linux_asm grid]$
截图如下：
17.安装过程
[grid@localhost ~]$ /home/grid/grid/runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 38826 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4095 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-10-17_03-31-41PM. Please wait ...[grid@localhost ~]$
17.1.
.jpg)
17.2.
17.3.
17.4.
17.5.
17.6.
17.6.1.检查安装条件
17.6.2.
执行修复脚本：
[root@localhost ~]# /tmp/CVU_11.2.0.1.0_grid/runfixup.sh
Response file being used is :/tmp/CVU_11.2.0.1.0_grid/fixup.response
Enable file being used is :/tmp/CVU_11.2.0.1.0_grid/fixup.enable
Log file location: /tmp/CVU_11.2.0.1.0_grid/orarun.log
Setting Kernel Parameters...
kernel.sem = 250 32000 100 128
fs.file-max = 6815744
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.wmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_max = 1048576
fs.aio-max-nr = 1048576
17.6.3. 安装缺失软件包
# yum install -ypackage_name
这些软件包其实已安装，只不过因为 Oracle Linux 6.4自带的软件包版本高于检查版本，所以检查不通过，忽略即可。
Oracle Linux 6.4的安装光盘中无 pdksh软件包，安装 ksh软件包即可。
# yum install -y ksh
因为没有 NTP时钟服务器，所以 NTP检查不通过，忽略即可。
17.6.4.
17.7.
17.8.
17.9.安装时间较长，请耐心等待。
-
最后的执行脚本步骤
安装过程中会弹出对话框，提示你以 root身份执行两个脚本：
[root@localhost ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@localhost ~]#/u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]: -- 输入回车
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Toconfigure Grid Infrastructurefor a Stand-Alone Server run the following command as the root user: --单实例安装需执行以下脚本
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
To configure Grid Infrastructure for a Cluster perform the following steps:
1. Provide values for Grid Infrastructure configuration parameters in the file - /u01/app/11.2.0/grid/crs/install/crsconfig_params. For details on how to do this, see the installation guide.
2. Run the following command as the root user:
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl
To update inventory properties for Grid Infrastructure, perform the following
steps. If a pre-11.2 home is already configured, execute the following:
11.2_Home/oui/bin/runInstaller -updateNodeList -silent -local CRS=false ORACLE_HOME=pre-11.2_Home
Always execute the following to register the current home:
11.2_Home/oui/bin/runInstaller -updateNodeList -silent -local CRS=true ORACLE_HOME=11.2_Home.
If either home is shared, provide the additional argument -cfs.
截图如下：
下边按照要求执行脚本：
[root@localhost ~]# /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
2013-10-17 16:18:19: Checking for super user privileges
2013-10-17 16:18:19: User has super user privileges
2013-10-17 16:18:19: Parsing the host name
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
/u01/app/11.2.0/grid/bin/clscfg.bin: error while loading shared libraries: libcap.so.1: cannot open shared object file:No such file or directory -- 报错
Failed to create keys in the OLR, rc = 32512, 32512
OLR configuration failed
[root@localhost ~]#
解决报错：
17.9.1.检查操作系统中 libcap.so是否已安装
如果是 64位系统，i686和 x86_64都要安装。
# yum install -y libcap*.i686
# yum install -y libcap*.x86_64
[root@localhost ~]# rpm -qa | grep libcap
libcap-ng-0.6.4-3.el6_0.1.i686
libcap-2.16-5.5.el6.x86_64
libcap-devel-2.16-5.5.el6.x86_64
libcap-devel-2.16-5.5.el6.i686
libcap-ng-0.6.4-3.el6_0.1.x86_64
libcap-2.16-5.5.el6.i686
libcap-ng-devel-0.6.4-3.el6_0.1.i686
libcap-ng-devel-0.6.4-3.el6_0.1.x86_64
[root@localhost ~]#
17.9.2. 检查 libcap.so 文件
[root@localhost ~]# ll /lib64/libcap.so*
lrwxrwxrwx 1 root root 11 Oct 17 16:28 /lib64/libcap.so -> libcap.so.2
lrwxrwxrwx. 1 root root 14 Oct 16 15:22 /lib64/libcap.so.2 -> libcap.so.2.16
-rwxr-xr-x 1 root root 19016 Oct 13 2011 /lib64/libcap.so.2.16
[root@localhost ~]#
17.9.3.
[root@localhost ~]# ln -s /lib64/libcap.so.2.16 /lib64/libcap.so.1
[root@localhost ~]#ln -s /lib64/libcap.so.2 /lib64/libcap.so
[root@localhost ~]# ll /lib64/libcap.so*
lrwxrwxrwx 1 root root 11 Oct 17 16:28 /lib64/libcap.so -> libcap.so.2
lrwxrwxrwx 1 root root 21 Oct 17 17:01 /lib64/libcap.so.1 -> /lib64/libcap.so.2.16
lrwxrwxrwx. 1 root root 14 Oct 16 15:22 /lib64/libcap.so.2 -> libcap.so.2.16
-rwxr-xr-x 1 root root 19016 Oct 13 2011 /lib64/libcap.so.2.16
[root@localhost ~]#
17.9.4. 重新执行 /u01/app/11.2.0/grid/root.sh 脚本
[root@localhost ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
网站题目：【ASM】OracleASM+11gR2+RHEL6.5安装
标题链接：http://cdkjz.cn/article/jcjoos.html
