资讯

精准传达 • 有效沟通

从品牌网站建设到网络营销策划，从策略到执行的一站式服务

网站建设 >

查看其它板块

命名访问控制列表详解-创新互联

命名访问控制列表详解

为企业提供成都网站设计、网站建设、外贸网站建设、网站优化、营销型网站、竞价托管、品牌运营等营销获客服务。创新互联拥有网络营销运营团队，以丰富的互联网营销经验助力企业精准获客，真正落地解决中小企业营销获客难题，做到“让获客更简单”。自创立至今，成功用技术实力解决了企业“网站建设、网络品牌塑造、网络营销”三大难题，同时降低了营销成本，提高了有效客户转化率，获得了众多企业客户的高度认可！

命名访问控制列表

本章目标：通过实验学会命名访问控制列表，添加访问控制，删除访问控制

实验图：

命名访问控制列表详解

4台主机，一个二层交换机，一个三层交换机
sw1:划分VLAN,给VLAN配置接口，做trunk链路
sw2:划分vlan,通过接口给vlan配置虚拟地址，做trunk链路，做命名访问控制
，关闭交换端口变成三层端口。
pc1:192.168.10.10/24
pc2:192.168.10.20/24
pc3:192.168.20.20/24
pc4:192.168.100.100/24

一.给二层交换机配置VLAN,给vlan配置接口,做trunk链路

sw1#conf t
sw1(config)#vlan 10,20
sw1(config-vlan)#do show vlan-sw b  //查看vlan详细信息
sw1(config-vlan)#ex
sw1(config)#do show vlan-sw b

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa1/0, Fa1/1, Fa1/2, Fa1/3
                                                Fa1/4, Fa1/5, Fa1/6, Fa1/7
                                                Fa1/8, Fa1/9, Fa1/10, Fa1/11
                                                Fa1/12, Fa1/13, Fa1/14, Fa1/15
10   VLAN0010                         active    
20   VLAN0020                         active    
1002 fddi-default                     act/unsup 
1003 token-ring-default               act/unsup 
1004 fddinet-default                  act/unsup 
1005 trnet-default                    act/unsup 
sw1(config)#int range fa1/1 -2
sw1(config-if-range)#sw mo acc         //进入接口模式
sw1(config-if-range)#sw acc vlan 10  //配置vlan
sw1(config-if-range)#ex
sw1(config)#do show vlan-sw b 

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa1/0, Fa1/3, Fa1/4, Fa1/5
                                                Fa1/6, Fa1/7, Fa1/8, Fa1/9
                                                Fa1/10, Fa1/11, Fa1/12, Fa1/13
                                                Fa1/14, Fa1/15
10   VLAN0010                         active    Fa1/1, Fa1/2
20   VLAN0020                         active    
1002 fddi-default                     act/unsup 
1003 token-ring-default               act/unsup 
1004 fddinet-default                  act/unsup 
1005 trnet-default                    act/unsup 
sw1(config)#int f1/3
sw1(config-if)#sw mo acc 
sw1(config-if)#sw acc vlan 20
sw1(config-if)#ex
sw1(config)#do show vlan-sw b

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa1/0, Fa1/4, Fa1/5, Fa1/6
                                                Fa1/7, Fa1/8, Fa1/9, Fa1/10
                                                Fa1/11, Fa1/12, Fa1/13, Fa1/14
                                                Fa1/15
10   VLAN0010                         active    Fa1/1, Fa1/2
20   VLAN0020                         active    Fa1/3
1002 fddi-default                     act/unsup 
1003 token-ring-default               act/unsup 
1004 fddinet-default                  act/unsup 
1005 trnet-default                    act/unsup 

sw1(config)#int f1/0
sw1(config-if)#sw mo t
sw1(config-if)#sw t en dot
sw1(config-if)#ex
sw1(config)#no ip routing  //关闭路由功能

二.进入三层交换机，划分vlan,通过接口给vlan配置虚拟网址（需要关闭交换端口）,配置trunk链路

sw2#conf t
sw2(config)#int f1/1
sw2(config-if)#no switchport //关闭交换端口
sw2(config-if)#ip add 192.168.100.1 255.255.255.0
sw2(config-if)#no shut
sw2(config-if)#do show ip int b
Interface                  IP-Address      OK? Method Status                Protocol
FastEthernet0/0            unassigned      YES unset  administratively down down    
FastEthernet0/1            unassigned      YES unset  administratively down down    
FastEthernet1/0            unassigned      YES unset  up                    up      
FastEthernet1/1            192.168.100.1   YES manual up                    up      
FastEthernet1/2            unassigned      YES unset  up                    down    
FastEthernet1/3            unassigned      YES unset  up                    down    
FastEthernet1/4            unassigned      YES unset  up                    down    
FastEthernet1/5            unassigned      YES unset  up                    down    
FastEthernet1/6            unassigned      YES unset  up                    down    
FastEthernet1/7            unassigned      YES unset  up                    down    
FastEthernet1/8            unassigned      YES unset  up                    down    
FastEthernet1/9            unassigned      YES unset  up                    down    
FastEthernet1/10           unassigned      YES unset  up                    down    
FastEthernet1/11           unassigned      YES unset  up                    down    
FastEthernet1/12           unassigned      YES unset  up                    down    
FastEthernet1/13           unassigned      YES unset  up                    down    
FastEthernet1/14           unassigned      YES unset  up                    down    
FastEthernet1/15           unassigned      YES unset  up                    down    
Vlan1                      unassigned      YES unset  up                    up      
sw2(config-if)#ex 
sw2(config)#vlan 10,20
sw2(config-vlan)#ex
sw2(config)#int vlan 10
sw2(config-if)#ip add 192.168.10.1 255.255.255.0
sw2(config-if)#no shut
sw2(config-if)#ex
sw2(config)#int vlan 20
sw2(config-if)#ip add 192.168.20.1 255.255.255.0
sw2(config-if)#no shut
sw2(config-if)#ex
sw2(config)#do show ip int b
Interface                  IP-Address      OK? Method Status                Protocol
FastEthernet0/0            unassigned      YES unset  administratively down down    
FastEthernet0/1            unassigned      YES unset  administratively down down    
FastEthernet1/0            unassigned      YES unset  up                    up      
FastEthernet1/1            192.168.100.1   YES manual up                    up      
FastEthernet1/2            unassigned      YES unset  up                    down    
FastEthernet1/3            unassigned      YES unset  up                    down    
FastEthernet1/4            unassigned      YES unset  up                    down    
FastEthernet1/5            unassigned      YES unset  up                    down    
FastEthernet1/6            unassigned      YES unset  up                    down    
FastEthernet1/7            unassigned      YES unset  up                    down    
FastEthernet1/8            unassigned      YES unset  up                    down    
FastEthernet1/9            unassigned      YES unset  up                    down    
FastEthernet1/10           unassigned      YES unset  up                    down    
FastEthernet1/11           unassigned      YES unset  up                    down    
FastEthernet1/12           unassigned      YES unset  up                    down    
FastEthernet1/13           unassigned      YES unset  up                    down    
FastEthernet1/14           unassigned      YES unset  up                    down    
FastEthernet1/15           unassigned      YES unset  up                    down    
Vlan1                      unassigned      YES unset  up                    up      
Vlan10                     192.168.10.1    YES manual up                    down    
Vlan20                     192.168.20.1    YES manual up                    down    
sw2(config)#int f1/0
sw2(config-if)#sw mo t
sw2(config-if)#sw t en dot
sw2(config-if)#ex

三.给每个主机配置IP地址和网关

PC4> 
PC4> ip 192.168.100.100 192.168.100.1
Checking for duplicate address...
PC1 : 192.168.100.100 255.255.255.0 gateway 192.168.100.1

PC1> ip 192.168.10.10 192.168.10.1
Checking for duplicate address...
PC1 : 192.168.10.10 255.255.255.0 gateway 192.168.10.1

PC2> 
PC2> ip 192.168.10.20 192.168.10.1
Checking for duplicate address...
PC1 : 192.168.10.20 255.255.255.0 gateway 192.168.10.1

PC3> ip 192.168.20.20 192.168.20.1
Checking for duplicate address...
PC1 : 192.168.20.20 255.255.255.0 gateway 192.168.20.1

四.测试是不是全网互通

PC1> ping 192.168.100.100

168.100.100 icmp_seq=1 timeout
bytes from 192.168.100.100 icmp_seq=2 ttl=63 time=14.997 ms
bytes from 192.168.100.100 icmp_seq=3 ttl=63 time=15.984 ms
bytes from 192.168.100.100 icmp_seq=4 ttl=63 time=16.953 ms
bytes from 192.168.100.100 icmp_seq=5 ttl=63 time=20.978 ms

PC1> ping 192.168.10.20
bytes from 192.168.10.20 icmp_seq=1 ttl=64 time=0.000 ms
bytes from 192.168.10.20 icmp_seq=2 ttl=64 time=0.000 ms
bytes from 192.168.10.20 icmp_seq=3 ttl=64 time=0.979 ms
bytes from 192.168.10.20 icmp_seq=4 ttl=64 time=0.000 ms

PC1> ping 192.168.20.20
168.20.20 icmp_seq=1 timeout
bytes from 192.168.20.20 icmp_seq=2 ttl=63 time=14.960 ms
bytes from 192.168.20.20 icmp_seq=3 ttl=63 time=18.941 ms
bytes from 192.168.20.20 icmp_seq=4 ttl=63 time=15.956 ms
bytes from 192.168.20.20 icmp_seq=5 ttl=63 time=19.973 ms

五.进入三层交换机配置命名访问控制列表

sw2(config)#ip access-list standard kgc  //进入标准访问控制，命名叫kgc
sw2(config-std-nacl)#permit host 192.168.10.10  //允许10.10主机访问
sw2(config-std-nacl)#deny 192.168.10.0 0.0.0.255 //拒绝10.0网段主机访问
sw2(config-std-nacl)#permit any  //允许所有主机访问
sw2(config-std-nacl)#ex
sw2(config)#do show access-lists    //查看访问控制列表
Standard IP access list kgc
    10 permit 192.168.10.10
    20 deny   192.168.10.0, wildcard bits 0.0.0.255
    30 permit any
sw2(config)#int f1/1
sw2(config-if)#ip access-group kgc out  //应用于接口，离限制最近的，如果我要设置为入，我需要设置三次，出就要一次就够了
sw2(config-if)#ex

六.测试我们实验的需求是否生效

PC1> ping 192.168.100.100
84 bytes from 192.168.100.100 icmp_seq=1 ttl=63 time=18.941 ms
84 bytes from 192.168.100.100 icmp_seq=2 ttl=63 time=15.408 ms
84 bytes from 192.168.100.100 icmp_seq=3 ttl=63 time=12.003 ms
84 bytes from 192.168.100.100 icmp_seq=4 ttl=63 time=20.997 ms

PC3> ping 192.168.100.100
84 bytes from 192.168.100.100 icmp_seq=1 ttl=63 time=20.942 ms
84 bytes from 192.168.100.100 icmp_seq=2 ttl=63 time=14.992 ms
84 bytes from 192.168.100.100 icmp_seq=3 ttl=63 time=13.963 ms
84 bytes from 192.168.100.100 icmp_seq=4 ttl=63 time=14.925 ms
84 bytes from 192.168.100.100 icmp_seq=5 ttl=63 time=21.940 ms

PC2> ping 192.168.100.100
*192.168.10.1 icmp_seq=1 ttl=255 time=8.972 ms (ICMP type:3, code:13, Communication administratively prohibited)
*192.168.10.1 icmp_seq=2 ttl=255 time=10.971 ms (ICMP type:3, code:13, Communication administratively prohibited)
*192.168.10.1 icmp_seq=3 ttl=255 time=5.987 ms (ICMP type:3, code:13, Communication administratively prohibited)
*192.168.10.1 icmp_seq=4 ttl=255 time=10.969 ms (ICMP type:3, code:13, Communication administratively prohibited)
*192.168.10.1 icmp_seq=5 ttl=255 time=2.998 ms (ICMP type:3, code:13, Communication administratively prohibited)

七.我们再加一条需求，我们有允许10.20主机可以去访问

sw2(config)#ip access-list standard kgc
sw2(config-std-nacl)#12 permit host 192.168.10.20  //我们只能写10的上面或者10-20之间，我们要写到20下面就没有任何意义，
已经拒绝10.0网段的了再写10.20无意义。
sw2(config-std-nacl)#ex
sw2(config)#do show access-lists
Standard IP access list kgc
    10 permit 192.168.10.10 (8 matches)
    12 permit 192.168.10.20
    20 deny   192.168.10.0, wildcard bits 0.0.0.255 (10 matches)
    30 permit any (5 matches)

八.来测试PC2,10.20能不能访问pc4主机

PC2> ping 192.168.100.100
192.168.100.100 icmp_seq=1 timeout
192.168.100.100 icmp_seq=2 timeout
84 bytes from 192.168.100.100 icmp_seq=3 ttl=63 time=20.970 ms
84 bytes from 192.168.100.100 icmp_seq=4 ttl=63 time=17.950 ms
84 bytes from 192.168.100.100 icmp_seq=5 ttl=63 time=18.008 ms

九.删除访问控制列表的一条，如果要删除整租ACL，no ip access-ist stand kgc

sw2(config)#ip access-list standard kgc
sw2(config-std-nacl)#no 12
sw2(config-std-nacl)#do show access-lists                                  
Standard IP access list kgc
    10 permit 192.168.10.10 (8 matches)
    20 deny   192.168.10.0, wildcard bits 0.0.0.255 (10 matches)
    30 permit any (5 matches)
sw2(config)#no ip access-list standard kgc            
sw2(config)#do show access-lists          

sw2(config)#

本章内容结束，谢谢收看

另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。


分享题目：命名访问控制列表详解-创新互联
浏览路径：http://cdkjz.cn/article/iijei.html
返回首页 了解更多建站资讯

相关资讯

多年建站经验

多一份参考，总有益处

联系快上网，免费获得专属《策划方案》及报价

咨询相关问题或预约面谈，可以通过以下方式与我们联系

大客户专线   成都：13518219792   座机：028-86922220

在线咨询 提交需求
友情链接 交换友情链接
三台网站建设成都响应式网站建设公司域名注册网站设计公司网络推广平台名片设计新都四新网站建设网页改版广汉锦华橡塑手机网站建设

成都网站建设公司地址：成都市青羊区太升南路288号锦天国际A座10层 建设咨询028-86922220

成都快上网科技有限公司-四川网站建设设计公司 | 蜀ICP备19037934号 Copyright 2020,ALL Rights Reserved cdkjz.cn | 成都网站建设 | © Copyright 2020版权所有.

专家团队为您提供成都网站建设,成都网站设计,成都品牌网站设计,成都营销型网站制作等服务,成都建网站就找快上网！ | 成都网站建设哪家好？ | 网站建设地图