Centos7.6下Mysql8.0.16编译安装

Centos 7.6 下MySQL8.0.16编译安装

1.最小化安装系统

2.安装基础包

yum -y install ntpdate gcc gcc-c++ ncurses ncurses-devel cmake readline-devel zlib.x86_64 zlib-devel.x86_64 bison libcurl-* net-tool* tree nmap sysstat lrzsz dos2unix telnet.x86_64 nethogs iftop iotop unzip ftp.x86_
64 xfs* expect vim wget psmisc openssh-client* libaio libaio1 libnuma openssl-devel bzip2

3.基础环境配置

systemctl stop firewalld
systemctl disabled firewalld
systemctl stop postfix
systemctl disable postfix
sed -i 's/^SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config && cat /etc/selinux/config >> ${tmplog_dir}/base.log 2>&1
setenforce 0
getenforce
useradd -M -s /sbin/nologin mysql
mkdir -pv /data/{conf,dumpdir,backupsets,scripts,mysql3306/{data,tmp,logs}}

4.内核参数修改

echo "vm.swappiness=10">>/etc/sysctl.conf
echo "net.ipv4.tcp_tw_recycle=1">>/etc/sysctl.conf
echo "net.ipv4.tcp_tw_reuse=1">>/etc/sysctl.conf
echo "vm.dirty_background_ratio=8">>/etc/sysctl.conf
echo "* soft nofile 1024000" >>/etc/security/limits.conf
echo "* hard nofile 1024000" >>/etc/security/limits.conf

数据盘挂挂载参数
rw,noatime,nodiratime,nobarrier

成都创新互联公司是专业的沿河网站建设公司，沿河接单;提供网站设计、成都网站设计,网页设计,网站设计,建网站,PHP网站建设等专业做网站服务;采用PHP框架,可快速的进行沿河网站开发网页制作和功能扩展;专业做搜索引擎喜爱的网站,专业的做网站团队,希望更多企业前来合作!

5.升级gcc

mkdir /usr/local/tools && cd /usr/local/tools
wget http://ftp.tsukuba.wide.ad.jp/software/gcc/releases/gcc-5.5.0/gcc-5.5.0.tar.xz
tar xf gcc-5.5.0.tar.xz
cd gcc-5.5.0
./contrib/download_prerequisites
mkdir build && cd build
../configure --enable-checking=release --enable-languages=c,c++ --disable-multilib
make && make install

6.升级cmake

建议另外开一个session防止环境变量未生效

cd /usr/local/tools
wget https://github.com/Kitware/CMake/releases/download/v3.14.5/cmake-3.14.5.tar.Z
./bootstrap
make && make install

如果出现以下错误
ibstdc++.so.6: version `CXXABI_1.3.9' not found (required by ./destructor)
处理如下：

find / -name "libstdc++.so*"
mv /usr/lib64/libstdc++.so.6.0.21 /tmp/
cp /usr/local/tools/gcc-5.5.0/build/x86_64-unknown-linux-gnu/libstdc++-v3/src/.libs/libstdc++.so.6.0.21 /usr/lib64/
mv /usr/lib64/libstdc++.so.6 /tmp/
ln -s libstdc++.so.6.0.21 libstdc++.so.6

7.编译安装Mysql

cd /usr/local/tools
tar xf  mysql-boost-8.0.16.tar.gz
cd mysql-8.0.16
cmake . \
-DWITH_BOOST=/usr/local/tools/mysql-8.0.16/boost/boost_1_69_0 \
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql \
-DMYSQL_DATADIR=/data/mysql3306/data \
-DWITHOUT_CSV_STORAGE_ENGINE=1 \
-DWITHOUT_FEDERATED_STORAGE_ENGINE=1 \
-DWITHOUT_ARCHIVE_STORAGE_ENGINE=1 \
-DFORCE_INSOURCE_BUILD=1 \
-DWITH_SSL=system \
-DCMAKE_CXX_COMPILER=/usr/local/bin/g++ \
-DCMAKE_C_COMPILER=/usr/local/bin/gcc
make -j 8
make install

8.生成配置文件

注：采用叶总的模板生成的(http://imysql.cn/my_cnf_generator)

cat /data/conf/my3306.cnf
[client]
port    = 3306
socket  = /data/mysql3306/data/mysql.sock
[mysql]
prompt="\u@netdatdb01-137-32 \R:\m:\s [\d]> "
no-auto-rehash
[mysqld]
user    = mysql
port    = 3306
basedir = /usr/local/mysql
datadir = /data/mysql3306/data
tmpdir = /data/mysql3306/tmp
socket  = /data/mysql3306/data/mysql.sock
pid-file = netdatdb01-137-32.pid
character-set-server = utf8mb4
skip_name_resolve = 1
#若你的MySQL数据库主要运行在境外，请务必根据实际情况调整本参数
default_time_zone = "+8:00"
open_files_limit    = 65535
back_log = 1024
max_connections = 512
max_connect_errors = 1000000
table_open_cache = 1024
table_definition_cache = 1024
table_open_cache_instances = 64
thread_stack = 512K
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 4M
join_buffer_size = 4M
thread_cache_size = 768
interactive_timeout = 600
wait_timeout = 600
tmp_table_size = 32M
max_heap_table_size = 32M
slow_query_log = 1
log_timestamps = SYSTEM
slow_query_log_file = /data/mysql3306/slow.log
log-error = /data/mysql3306/error.log
long_query_time = 0.1
log_queries_not_using_indexes =1
log_throttle_queries_not_using_indexes = 60
min_examined_row_limit = 100
log_slow_admin_statements = 1
log_slow_slave_statements = 1
server-id = 3306
log-bin = /data/mysql3306/logs/mybinlog
sync_binlog = 1
binlog_cache_size = 4M
max_binlog_cache_size = 2G
max_binlog_size = 1G
#注意：MySQL 8.0开始，binlog_expire_logs_seconds选项也存在的话，会忽略expire_logs_days选项
expire_logs_days = 7
master_info_repository = TABLE
relay_log_info_repository = TABLE
gtid_mode = on
enforce_gtid_consistency = 1
log_slave_updates
slave-rows-search-algorithms = 'INDEX_SCAN,HASH_SCAN'
binlog_format = row
binlog_checksum = 1
relay_log_recovery = 1
relay-log-purge = 1
key_buffer_size = 32M
read_buffer_size = 8M
read_rnd_buffer_size = 4M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_repair_threads = 1
lock_wait_timeout = 3600
explicit_defaults_for_timestamp = 1
innodb_thread_concurrency = 0
innodb_sync_spin_loops = 100
innodb_spin_wait_delay = 30
transaction_isolation = REPEATABLE-READ
#innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 2867M
innodb_buffer_pool_instances = 4
innodb_buffer_pool_load_at_startup = 1
innodb_buffer_pool_dump_at_shutdown = 1
innodb_data_file_path = ibdata1:1G:autoextend
innodb_flush_log_at_trx_commit = 1
innodb_log_buffer_size = 32M
innodb_log_file_size = 2G
innodb_log_files_in_group = 2
innodb_max_undo_log_size = 4G
innodb_undo_directory = /data/mysql3306/data/undolog
innodb_undo_tablespaces = 95
# 根据您的服务器IOPS能力适当调整
# 一般配普通SSD盘的话，可以调整到 10000 - 20000
# 配置高端PCIe SSD卡的话，则可以调整的更高，比如 50000 - 80000
innodb_io_capacity = 4000
innodb_io_capacity_max = 8000
innodb_flush_sync = 0
innodb_flush_neighbors = 0
innodb_write_io_threads = 8
innodb_read_io_threads = 8
innodb_purge_threads = 4
innodb_page_cleaners = 4
innodb_open_files = 65535
innodb_max_dirty_pages_pct = 50
innodb_flush_method = O_DIRECT
innodb_lru_scan_depth = 4000
innodb_checksum_algorithm = crc32
innodb_lock_wait_timeout = 10
innodb_rollback_on_timeout = 1
innodb_print_all_deadlocks = 1
innodb_file_per_table = 1
innodb_online_alter_log_max_size = 4G
innodb_stats_on_metadata = 0
#注意：MySQL 8.0.16开始删除该选项
#internal_tmp_disk_storage_engine = InnoDB
# some var for MySQL 8
log_error_verbosity = 3
innodb_print_ddl_logs = 1
binlog_expire_logs_seconds = 604800
#innodb_dedicated_server = 0
innodb_status_file = 1
#注意: 开启 innodb_status_output & innodb_status_output_locks 后, 可能会导致log-error文件增长较快
innodb_status_output = 0
innodb_status_output_locks = 0
#performance_schema
performance_schema = 1
performance_schema_instrument = '%memory%=on'
performance_schema_instrument = '%lock%=on'
#innodb monitor
innodb_monitor_enable="module_innodb"
innodb_monitor_enable="module_server"
innodb_monitor_enable="module_dml"
innodb_monitor_enable="module_ddl"
innodb_monitor_enable="module_trx"
innodb_monitor_enable="module_os"
innodb_monitor_enable="module_purge"
innodb_monitor_enable="module_log"
innodb_monitor_enable="module_lock"
innodb_monitor_enable="module_buffer"
innodb_monitor_enable="module_index"
innodb_monitor_enable="module_ibuf_system"
innodb_monitor_enable="module_buffer_page"
innodb_monitor_enable="module_adaptive_hash"
[mysqldump]
quick
max_allowed_packet = 32M

9.初始化数据库

mkdir -pv /data/{mysql3306/{data,logs,tmp},conf,scripts,dumpdir}
/usr/local/mysql/bin/mysqld  --defaults-file=/data/conf/my3306.cnf --initialize --user=mysql --basedir=/usr/local/mysql --datadir=/data/mysql3306/data

10.配置启动脚本

#!/bin/sh
port="3306"
my_lp="3306_system"
mysql_bin="/usr/local/mysql/bin/"
mysql_sock="/data/mysql${port}/data/mysql.sock"
config_file="/data/conf/my3306.cnf"
#start Mysql Services
function_start_mysql()
{
    if [ ! -e "$mysql_sock" ];then
      printf "Starting MySQL_3306 ...\n"
      ${mysql_bin}/mysqld --defaults-file=${config_file} 2>&1 > /dev/null &
    else
      printf "MySQL_3306 is running...\n"
      exit
    fi
}
#stop Mysql Services
function_stop_mysql()
{
    if [ ! -e "$mysql_sock" ];then
       printf "MySQL_3306 is stopped...\n"
       exit
    else
       printf "Stoping MySQL_3306...\n"
       ${mysql_bin}/mysqladmin --login-path=${my_lp} -S ${mysql_sock} shutdown
   fi
}
#restart Mysql Services
function_restart_mysql()
{
    printf "Restarting MySQL_3306...\n"
    function_stop_mysql
    sleep 2
    function_start_mysql
}
case $1 in
start)
    function_start_mysql
;;
stop)
    function_stop_mysql
;;
restart)
    function_restart_mysql
;;
*)
    printf "Usage: /data/scripts/mysql3306 {start|stop|restart}\n"
esac
chmod a+x /data/scripts/mysql3306

11.启动服务

/data/scripts/mysql3306 start

12.修改密码

mysql -uroot -p -S /data/mysql3306/data/mysql.sock
alter user user() identified by "netdata";

13.设置login-path

mysql_config_editor set --login-path=3306_root -uroot -p -S /data/mysql3306/data/mysql.sock

14.设置环境变量

echo "alias mysql3306='mysql --login-path=3306_root --defaults-file=/data/conf/my3306.cnf --default-character-set=utf8mb4'
">>~/.bashrc
source ~/.bashrc