Nagios是一款企业级开源免费的监控工具，其关注点在于保证服务的正常运行，并且在服务发生问题时提供报警机制。
10年积累的网站设计、
网站制作经验，可以快速应对客户对网站的新想法和需求。提供各种问题对应的解决方案。让选择我们的客户得到更好、更有力的网络服务。我虽然不认识你，你也不认识我。但先
网站制作后付款的网站建设流程，更有
曹妃甸免费网站建设让你可以放心的选择与我们合作。
1. 实验环境
Nagios服务端：10.20.2.233
Nagios监控端：web1(10.20.2.2.235) 、 web2(10.20.2.236)
2. Nagios服务端部署
1) 安装nagios依赖软件包
通过yum方式快速安装Nagios所需的依赖软件包
yum -y install gd gd-devel openssl openssl-devel httpd php gcc glibc glibc-common make net-snmp wget
2) 创建nagios账户与组
配置时使用--with-nagios-user和--with-nagios-group指定以该账号的身份运行Nagios。
useradd nagios
3) ×××地址
Nagios:
http://superb-sea2.dl.sourceforge.net/project/nagios/nagios-4.x/nagios-4.2.1/nagios-4.2.1.tar.gz
Nagios-plugin:
https://nagios-plugins.org/download/nagios-plugins-2.1.2.tar.gz
Nrpe:
http://pilotfiber.dl.sourceforge.net/project/nagios/nrpe-3.x/nrpe-3.0.1.tar.gz
4) Nagios的安装
tar -zxf nagios-4.2.1.tar.gz -C /usr/local
cd /usr/local
cd nagios-4.2.1/
./configure --with-nagios-user=nagios --with-nagios-group=nagios
make all
make install #安装主程序，CGI以及HTML文件
make install-init #安装启动脚本/etc/init.d/nagios
make install-commandmode #安装与配置目录权限
make install-config #安装配置文件模板
# 由于nagios最终将以web的形式进行管理与监控，安装过程中使用make install-webconf命令将生成Apache附加配置文件/etc/httpd/conf.d/nagios.conf
make install-webconf
5) Nagios插件安装
tar -zxf nagios-plugins-2.1.2.tar.gz -C /usr/local
cd /usr/local/nagios-plugins-2.1.2/
./configure --prefix=/usr/local/nagios
make
make install
tar -zxf nrpe-3.0.1.tar.gz -C /usr/local/
cd /usr/local
cd nrpe-3.0.1/
./configure --prefix=/usr/local/nagios
make all
make install-plugin
make install-daemon
make install-daemon-config
chown nagios:nagios -R /usr/local/nagios
6) 禁用selinux并关闭防火墙
setenforce 0
service iptables stop
7) 创建web访问账户
htpasswd -c /usr/local/etc/htpasswd.users tomcat
8) 启动nagios
/etc/init.d/httpd start
/etc/init.d/nagios start
9) 修改nagios配置文件
主配置文件：nagios.cfg
主配置文件中使用cfg_file配置项加载其他配置文件，为了方便管理，将两台监控主机创建不同的配置文件，10.20.2.235配置文件名为web1.cfg，10.20.2.236配置文件名为web2.cfg
vi /usr/local/nagios/etc/nagios.cfg
cfg_file=/usr/local/nagios/etc/objects/commands.cfg
cfg_file=/usr/local/nagios/etc/objects/contacts.cfg
cfg_file=/usr/local/nagios/etc/objects/timeperiods.cfg
cfg_file=/usr/local/nagios/etc/objects/templates.cfg
# Definitions for monitoring the local (Linux) host
cfg_file=/usr/local/nagios/etc/objects/localhost.cfg
#下面两个配置文件需要手动创建出来，用于监控两台web服务器
cfg_file=/usr/local/nagios/etc/web1.cfg
cfg_file=/usr/local/nagios/etc/web2.cfg
……
修改CGI配置文件(cgi.cfg)，需要将访问web页面的账号加入进来
vi /usr/local/nagios/etc/cgi.cfg
use_authentication=1
authorized_for_system_information=nagiosadmin,tomcat
authorized_for_configuration_information=nagiosadmin,tomcat
authorized_for_system_commands=nagiosadmin,tomcat
authorized_for_all_services=nagiosadmin,tomcat
authorized_for_all_hosts=nagiosadmin,tomcat
authorized_for_all_service_commands=nagiosadmin,tomcat
authorized_for_all_host_commands=nagiosadmin,tomcat
……
修改命令配置文件（commands.cfg），该文件定义具体的命令实现方式，如发送报警邮件具体使用什么工具、邮件内容格式定义。
vi /usr/local/nagios/etc/objects/commands.cfg
……
define command{
command_name check-host-alive
command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
}
……
#以下内容需要手动添加，用于进行远程主机监控，需要安装nrpe软件包
define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}修改nrpe配置文件（nrpe.cfg），用于监控远程主机所需要的命令
vi /usr/local/nagios/etc/nrpe.cfg
command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
command[check_hda1]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/hda1
command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z
command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200
#下面一行为手动添加
command[check_disk]=/usr/local/nagios/libexec/check_disk -w 20% -c 10%
……
修改监控主机配置文件(localhost.cfg)，该文件用于设置如何监控本机服务器资源。
vi /usr/local/nagios/etc/objects/localhost.cfg
……
define host{
use linux-server ; Name of host template to use
; This host definition will inherit all variables that are defined
; in (or inherited by) the linux-server host template definition.
host_name localhost
alias localhost
address 127.0.0.1
}
……
define hostgroup{
hostgroup_name linux-servers ; The name of the hostgroup
alias Linux Servers ; Long name of the group
members localhost ; Comma separated list of hosts that belong to this group
}
……创建远程监控配置文件web1.cfg与web2.cfg，用于监控远程服务器系统资源与服务，可以使用localhost.cfg作为参考模板。下面列出web1.cfg的所有内容，web2.cfg 只需要参考web1.cfg的内容修改主机名称、IP地址以及主机名称即可。
define host{
use linux-server ; Name of host template to use
; This host definition will inherit all variables that are defined
; in (or inherited by) the linux-server host template definition.
host_name web1
alias test.com
address 10.20.2.235
}
define hostgroup{
hostgroup_name webs ; The name of the hostgroup
alias Linux Servers ; Long name of the group
members web1 ; Comma separated list of hosts that belong to this group
}
define service{
use generic-service ; Name of service template to use
host_name web1
service_description PING
check_command check_ping!100.0,20%!500.0,60%
notifications_enabled 1
}
define service{
use generic-service ; Name of service template to use
host_name web1
service_description Sys_Load
check_command check_nrpe!check_load
notifications_enabled 1
}
define service{
use generic-service ; Name of service template to use
host_name web1
service_description Current Users
check_command check_nrpe!check_users
notifications_enabled 1
}
define service{
use generic-service ; Name of service template to use
host_name web1
service_description Total Processes
check_command check_nrpe!check_total_procs
notifications_enabled 1
}
define service{
use generic-service ; Name of service template to use
host_name web1
service_description SSH
check_command check_ssh
notifications_enabled 1
}
define service{
use generic-service ; Name of service template to use
host_name web1
service_description HTTP
check_command check_http
notifications_enabled 1
}10) 重新加载nagios配置
其他配置文件不需修改，可以直接使用，重启nagios，重新加载所有的配置
/etc/init.d/nagios restart
3. Nagios监控端部署
下面以web1为例，web2与web1操作一致
1) yum安装nagios插件需依赖的软件包
yum -y install openssl openssl-devel
2) 创建nagios用户和组
useradd -s /sbin/nologin nagios
3) 安装Nagios-plugin
tar -zxf nagios-plugins-2.1.2.tar.gz -C /usr/local
cd /usr/local/
cd nagios-plugins-2.1.2/
./configure
make
make install
4) 安装Nrpe
tar -zxf nrpe-3.0.1.tar.gz -C /usr/local
cd /usr/local/nrpe-3.0.1/
./configure
make all
make install-plugin
make install-daemon
make isntall-daemon-config
chown -R nagios:nagios /usr/local/nagios
5) 修改nrpe配置文件
cp /usr/local/nrpe-3.0.1/sample-config/nrpe.cfg /usr/local/nagios/etc/
vi /usr/local/nagios/etc/nrpe.cfg
……
allowed_hosts=127.0.0.1,10.20.2.233
……
command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
command[check_hda1]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/hda1
command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z
command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200
#下面一行为手动添加
command[check_disk]=/usr/local/nagios/libexec/check_disk -w 20% -c 10%
6) 禁用selinux并关闭防火墙
setenforce 0
service iptables stop
7) 启动nrpe
/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
4. 验证并进行监控
1) 验证监控端的nrpe
管理员在Nagios服务端通过check_nrpe检测被监控端相关的性能参数，单独使用check_nrpe可以检测被监控端的nrpe版本号
[root@test etc]# /usr/local/nagios/libexec/check_nrpe -H 10.20.2.235
NRPE v3.0.1
[root@test etc]# /usr/local/nagios/libexec/check_nrpe -H 10.20.2.236
NRPE v3.0.1
[root@test etc]# /usr/local/nagios/libexec/check_nrpe -H 10.20.2.237
connect to address 10.20.2.237 port 5666: Connection refused
connect to host 10.20.2.237 port 5666: Connection refused
2) 访问web页面进行监控
以上信息已经能够检测到被监控端的nrpe，此时可以通过浏览器进行访问：
http://10.20.2.233/nagios
另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
网站名称：Nagios监控系统安装和配置-创新互联
分享地址：
http://cdkjz.cn/article/essci.html
