这篇文章给大家分享的是有关Amabari怎样搭建Hadoop集群的内容。小编觉得挺实用的，因此分享给大家做个参考，一起跟随小编过来看看吧。
目前累计服务客户上1000+，积累了丰富的产品开发及服务经验。以网站设计水平和技术实力，树立企业形象，为客户提供
成都做网站、成都网站设计、网站策划、网页设计、网络营销、VI设计、
网站改版、漏洞修补等服务。
成都创新互联公司始终以务实、诚信为根本，不断创新和提高建站品质，通过对领先技术的掌握、对创意设计的研究、对客户形象的视觉传递、对应用系统的结合，为客户提供更好的一站式互联网解决方案，携手广大客户，共同发展进步。
一、系统环境
1.系统版本
[root@manager ~]# cat /etc/centos-release
CentOS Linux release 7.4.1708 (Core)
2.主机规划
| 主机名 | IP地址 | 角色 |
| manager | 192.168.10.131
| ambari-server |
vm1
| 192.168.10.128 | agent
|
| vm2 | 192.168.10.129 | agent |
| vm3 | 192.168.10.130 | agent |
3.软件版本
ambari-2.4.3.0-centos7.tar.gz
HDP-2.5.3.0-centos7-rpm.tar.gz
HDP-UTILS-1.1.0.21-centos7.tar.gz
二、环境准备（所有节点上都要配置）
1.修改主机名
2.防火墙和selinux
[root@manager ~]# systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)
[root@manager ~]# getenforce
Disabled
[root@manager ~]#
3.配置hosts文件
[root@manager ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.10.128 vm1
192.168.10.129 vm2
192.168.10.130 vm3
192.168.10.131 manager
4.配置SSH免密码登陆
5.关闭linux的THP服务
#在GRUB_CMDLINE_LINUX这一行后面添加transparent_hugepage=never，如下
[root@manager ~]# cat /etc/default/grub
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet transparent_hugepage=never"
GRUB_DISABLE_RECOVERY="true"
#执行以下命令
[root@manager ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
[root@manager ~]# systemctl disable tuned
#重启后显示如下
[root@manager ~]# cat /sys/kernel/mm/transparent_hugepage/enabled
always madvise [never]
[root@manager ~]# grep AnonHugePages /proc/meminfo
AnonHugePages: 0 kB
[root@manager ~]#
6.配置UMASK
[root@manager ~]# umask 0022
[root@manager ~]# umask
0022
7.配置时间同步NTP
[root@manager ~]# yum -y install ntp
[root@manager ~]# systemctl start ntpd
[root@manager ~]# systemctl enable ntpd
8.安装JDK并配置JAVA_HOME环境变量
三、安装Ambari集群（只在manager上配置)
1.安装HTTP服务
[root@manager ~]# yum install -y httpd
[root@manager ~]# systemctl start httpd
[root@manager ~]# systemctl enable httpd
2.安装MySQL
3.配置MySQL
#mysql有密码复杂度要求，如果不需要密码策略在/etc/my.cnf文件中添加如下配置并重启mysql即可禁用
validate_password = off
systemctl restart mysqld
#查看mysql的初始默认密码
[root@manager ~]# cat /var/log/mysqld.log | grep password
2017-12-13T01:49:55.629403Z 1 [Note] A temporary password is generated for root@localhost: 3aYp&Zsqq7Ov
#使用初始密码进入mysql修改密码
ALTER USER 'root'@'localhost' IDENTIFIED BY '123456';
#在mysql中创建ambari数据库及用户
CREATE DATABASE ambari CHARACTER SET utf8 ;
CREATE USER 'ambari'@'%'IDENTIFIED BY '123456';
CREATE USER 'ambari'@'local'IDENTIFIED BY '123456';
GRANT ALL PRIVILEGES ON *.* TO 'ambari'@'%';
FLUSH PRIVILEGES;
#创建hive和其它数据库也类似
4.下载Ambari和HDP
wget -nv http://public-repo-1.hortonworks.com/ambari/centos7/2.x/updates/2.4.3.0/ambari-2.4.3.0-centos7.tar.gz
wget -nv http://public-repo-1.hortonworks.com/HDP/centos7/2.x/updates/2.5.3.0/HDP-2.5.3.0-centos7-rpm.tar.gz
wget -nv http://public-repo-1.hortonworks.com/HDP-UTILS-1.1.0.21/repos/centos7/HDP-UTILS-1.1.0.21-centos7.tar.gz
5.解压至httpd目录下
[root@manager ~]# mkdir /var/www/html/ambari
[root@manager ~]# mkdir /var/www/html/ambari/HDP-UTILS
tar zxvf ambari-2.4.3.0-centos7.tar.gz -C /var/www/html/ambari
tar zxvf HDP-2.5.3.0-centos7-rpm.tar.gz -C /var/www/html/ambari
tar zxvf HDP-UTILS-1.1.0.21-centos7.tar.gz -C /var/www/html/ambari/HDP-UTILS
6.安装本地源制作相关工具
[root@manager ~]# yum install -y yum-utils createrepo yum-plugin-priorities
[root@manager ~]# vim /etc/yum/pluginconf.d/priorities.conf
[main]
enabled = 1
gpgcheck=0
[root@manager data]# cd /var/www/html/ambari
[root@manager ambari]# createrepo ./
7.配置本地源
[root@manager ~]# cat /etc/yum.repos.d/ambari.repo
[ambari-2.4.3.0]
name=ambari-2.4.3.0
baseurl=http://manager/ambari/ambari/centos7/
gpgcheck=1
gpgkey=http://manager/ambari/ambari/centos7/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins
enabled=1
priority=1
[root@manager ~]# cat /etc/yum.repos.d/hdp.repo
[HDP-2.5.3.0]
name=HDP
baseurl=http://manager/ambari/HDP/centos7/
gpgcheck=1
gpgkey=http://manager/ambari/HDP/centos7/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins
enabled=1
priority=1
[HDP-UTILS-1.1.0.21]
name=HDP-UTILS
baseurl=http://manager/ambari/HDP-UTILS/
gpgcheck=1
gpgkey=http://manager/ambari/HDP-UTILS/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins
enabled=1
priority=1
[root@manager ~]# yum clean all
[root@manager ~]# yum makecache
#查看ambari和hdp的资源库
[root@manager ~]# yum repolist
repo id repo name status
HDP-2.5.3.0 HDP 200
HDP-UTILS-1.1.0.21 HDP-UTILS 64
ambari-2.4.3.0 ambari-2.4.3.0
8.安装ambari和mysql驱动
[root@manager ~]# yum install -y ambari-server
[root@manager ~]# yum install -y mysql-connector-java
9.配置ambari
[root@manager ~]# ambari-server setup
Using python /usr/bin/python
Setup ambari-server
Checking SELinux...
SELinux status is 'disabled'
Customize user account for ambari-server daemon [y/n] (n)? y
Enter user account for ambari-server daemon (root):root
Adjusting ambari-server permissions and ownership...
Checking firewall status...
Checking JDK...
Do you want to change Oracle JDK [y/n] (n)? y
[1] Oracle JDK 1.8 + Java Cryptography Extension (JCE) Policy Files 8
[2] Oracle JDK 1.7 + Java Cryptography Extension (JCE) Policy Files 7
[3] Custom JDK
==============================================================================
Enter choice (1): 3
WARNING: JDK must be installed on all hosts and JAVA_HOME must be valid on all hosts.
WARNING: JCE Policy files are required for configuring Kerberos security. If you plan to use Kerberos,please make sure JCE Unlimited Strength Jurisdiction Policy Files are valid on all hosts.
Path to JAVA_HOME: /usr/local/jdk
Validating JDK on Ambari Server...done.
Completing setup...
Configuring database...
Enter advanced database configuration [y/n] (n)? y
Configuring database...
==============================================================================
Choose one of the following options:
[1] - PostgreSQL (Embedded)
[2] - Oracle
[3] - MySQL / MariaDB
[4] - PostgreSQL
[5] - Microsoft SQL Server (Tech Preview)
[6] - SQL Anywhere
[7] - BDB
==============================================================================
Enter choice (3): 3
Hostname (localhost):
Port (3306):
Database name (ambari):
Username (ambari):
Enter Database Password (123456):
Configuring ambari database...
Copying JDBC drivers to server resources...
Configuring remote database connection properties...
WARNING: Before starting Ambari Server, you must run the following DDL against the database to create the schema: /var/lib/ambari-server/resources/Ambari-DDL-MySQL-CREATE.sql
Proceed with configuring remote database connection properties [y/n] (y)? y
Extracting system views...
.............
Adjusting ambari-server permissions and ownership...
Ambari Server 'setup' completed successfully.
10.使用msyql用户ambari在ambari数据库中导入数据
[root@manager ~]# mysql -u ambari -p123456
mysql> use ambari
Database changed
mysql> source /var/lib/ambari-server/resources/Ambari-DDL-MySQL-CREATE.sql
11.启动ambari
[root@manager ~]# ambari-server start
#在浏览器中输入ambari地址
http://192.168.10.131:8080
感谢各位的阅读！关于“Amabari怎样搭建Hadoop集群”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，让大家可以学到更多知识，如果觉得文章不错，可以把它分享出去让更多的人看到吧！
另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
分享题目：Amabari怎样搭建Hadoop集群-创新互联
URL分享：
http://cdkjz.cn/article/djiegc.html
