资讯

精准传达 • 有效沟通

从品牌网站建设到网络营销策划，从策略到执行的一站式服务

网站建设 >

查看其它板块

【gdb配置】打印stl容器，.gdbinit文件-创新互联

1. gdb打印C++ STL容器

原生gdb通过p打印C++容器，打印出的内容往往难以理解，通过以下的脚本可以实现常用容器的打印。

创新互联建站坚持“要么做到，要么别承诺”的工作理念，服务领域包括：做网站、网站制作、企业官网、英文网站、手机端网站、网站推广等服务，满足客户于互联网时代的双辽网站设计、移动媒体设计的需求，帮助企业找到有效的互联网解决方案。努力成为您成熟可靠的网络建设合作伙伴！
  1. 拷贝以下内容到新文件stl_views_1.0.3.gdb
#                                                                                                        
#   STL GDB evaluators/views/utilities - 1.03
#
#   The new GDB commands:                                                         
#         are entirely non instrumental                                             
#         do not depend on any "inline"(s) - e.g. size(), [], etc
#       are extremely tolerant to debugger settings
#                                                                                 
#   This file should be "included" in .gdbinit as following:
#   source stl-views.gdb or just paste it into your .gdbinit file
#
#   The following STL containers are currently supported:
#
#       std::vector-- via pvector command
#       std::list-- via plist or plist_member command
#       std::map-- via pmap or pmap_member command
#       std::multimap-- via pmap or pmap_member command
#       std::set-- via pset command
#       std::multiset-- via pset command
#       std::deque-- via pdequeue command
#       std::stack-- via pstack command
#       std::queue-- via pqueue command
#       std::priority_queue-- via ppqueue command
#       std::bitset-- via pbitset command
#       std::string -- via pstring command
#       std::widestring -- via pwstring command
#
#   The end of this file contains (optional) C++ beautifiers
#   Make sure your debugger supports $argc
#
#   Simple GDB Macros writen by Dan Marinescu (H-PhD) - License GPL
#   Inspired by intial work of Tom Malnar, 
#     Tony Novac (PhD) / Cornell / Stanford,
#     Gilad Mishne (PhD) and Many Many Others.
#   Contact: dan_c_marinescu@yahoo.com (Subject: STL)
#
#   Modified to work with g++ 4.3 by Anders Elton
#   Also added _member functions, that instead of printing the entire class in map, prints a member.



#
# std::vector<>#

define pvector
    if $argc == 0
        help pvector
    else
        set $size = $arg0._M_impl._M_finish - $arg0._M_impl._M_start
        set $capacity = $arg0._M_impl._M_end_of_storage - $arg0._M_impl._M_start
        set $size_max = $size - 1
    end
    if $argc == 1
        set $i = 0
        while $i< $size
            printf "elem[%u]: ", $i
            p *($arg0._M_impl._M_start + $i)
            set $i++
        end
    end
    if $argc == 2
        set $idx = $arg1
        if $idx< 0 || $idx >$size_max
            printf "idx1, idx2 are not in acceptable range: [0..%u].\n", $size_max
        else
            printf "elem[%u]: ", $idx
            p *($arg0._M_impl._M_start + $idx)
        end
    end
    if $argc == 3
      set $start_idx = $arg1
      set $stop_idx = $arg2
      if $start_idx >$stop_idx
        set $tmp_idx = $start_idx
        set $start_idx = $stop_idx
        set $stop_idx = $tmp_idx
      end
      if $start_idx< 0 || $stop_idx< 0 || $start_idx >$size_max || $stop_idx >$size_max
        printf "idx1, idx2 are not in acceptable range: [0..%u].\n", $size_max
      else
        set $i = $start_idx
        while $i<= $stop_idx
            printf "elem[%u]: ", $i
            p *($arg0._M_impl._M_start + $i)
            set $i++
        end
      end
    end
    if $argc >0
        printf "Vector size = %u\n", $size
        printf "Vector capacity = %u\n", $capacity
        printf "Element "
        whatis $arg0._M_impl._M_start
    end
end

document pvector
    Prints std::vectorinformation.
    Syntax: pvectorNote: idx, idx1 and idx2 must be in acceptable range [0...size()-1].
    Examples:
    pvector v - Prints vector content, size, capacity and T typedef
    pvector v 0 - Prints element[idx] from vector
    pvector v 1 2 - Prints elements in range [idx1..idx2] from vector
end 

#
# std::list<>#

define plist
    if $argc == 0
        help plist
    else
        set $head = &$arg0._M_impl._M_node
        set $current = $arg0._M_impl._M_node._M_next
        set $size = 0
        while $current != $head
            if $argc == 2
                printf "elem[%u]: ", $size
                p *($arg1*)($current + 1)
            end
            if $argc == 3
                if $size == $arg2
                    printf "elem[%u]: ", $size
                    p *($arg1*)($current + 1)
                end
            end
            set $current = $current._M_next
            set $size++
        end
        printf "List size = %u \n", $size
        if $argc == 1
            printf "List "
            whatis $arg0
            printf "Use plistto see the elements in the list.\n"
        end
    end
end

document plist
    Prints std::listinformation.
    Syntax: plist: Prints list size, if T defined all elements or just element at idx
    Examples:
    plist l - prints list size and definition
    plist l int - prints all elements and list size
    plist l int 2 - prints the third element in the list (if exists) and list size
end

define plist_member
    if $argc == 0
        help plist_member
    else
        set $head = &$arg0._M_impl._M_node
        set $current = $arg0._M_impl._M_node._M_next
        set $size = 0
        while $current != $head
            if $argc == 3
                printf "elem[%u]: ", $size
                p (*($arg1*)($current + 1)).$arg2
            end
            if $argc == 4
                if $size == $arg3
                    printf "elem[%u]: ", $size
                    p (*($arg1*)($current + 1)).$arg2
                end
            end
            set $current = $current._M_next
            set $size++
        end
        printf "List size = %u \n", $size
        if $argc == 1
            printf "List "
            whatis $arg0
            printf "Use plist_memberto see the elements in the list.\n"
        end
    end
end

document plist_member
    Prints std::listinformation.
    Syntax: plist: Prints list size, if T defined all elements or just element at idx
    Examples:
    plist_member l int member - prints all elements and list size
    plist_member l int member 2 - prints the third element in the list (if exists) and list size
end


#
# std::map and std::multimap
#

define pmap
    if $argc == 0
        help pmap
    else
        set $tree = $arg0
        set $i = 0
        set $node = $tree._M_t._M_impl._M_header._M_left
        set $end = $tree._M_t._M_impl._M_header
        set $tree_size = $tree._M_t._M_impl._M_node_count
        if $argc == 1
            printf "Map "
            whatis $tree
            printf "Use pmapto see the elements in the map.\n"
        end
        if $argc == 3
            while $i< $tree_size
                set $value = (void *)($node + 1)
                printf "elem[%u].left: ", $i
                p *($arg1*)$value
                set $value = $value + sizeof($arg1)
                printf "elem[%u].right: ", $i
                p *($arg2*)$value
                if $node._M_right != 0
                    set $node = $node._M_right
                    while $node._M_left != 0
                        set $node = $node._M_left
                    end
                else
                    set $tmp_node = $node._M_parent
                    while $node == $tmp_node._M_right
                        set $node = $tmp_node
                        set $tmp_node = $tmp_node._M_parent
                    end
                    if $node._M_right != $tmp_node
                        set $node = $tmp_node
                    end
                end
                set $i++
            end
        end
        if $argc == 4
            set $idx = $arg3
            set $ElementsFound = 0
            while $i< $tree_size
                set $value = (void *)($node + 1)
                if *($arg1*)$value == $idx
                    printf "elem[%u].left: ", $i
                    p *($arg1*)$value
                    set $value = $value + sizeof($arg1)
                    printf "elem[%u].right: ", $i
                    p *($arg2*)$value
                    set $ElementsFound++
                end
                if $node._M_right != 0
                    set $node = $node._M_right
                    while $node._M_left != 0
                        set $node = $node._M_left
                    end
                else
                    set $tmp_node = $node._M_parent
                    while $node == $tmp_node._M_right
                        set $node = $tmp_node
                        set $tmp_node = $tmp_node._M_parent
                    end
                    if $node._M_right != $tmp_node
                        set $node = $tmp_node
                    end
                end
                set $i++
            end
            printf "Number of elements found = %u\n", $ElementsFound
        end
        if $argc == 5
            set $idx1 = $arg3
            set $idx2 = $arg4
            set $ElementsFound = 0
            while $i< $tree_size
                set $value = (void *)($node + 1)
                set $valueLeft = *($arg1*)$value
                set $valueRight = *($arg2*)($value + sizeof($arg1))
                if $valueLeft == $idx1 && $valueRight == $idx2
                    printf "elem[%u].left: ", $i
                    p $valueLeft
                    printf "elem[%u].right: ", $i
                    p $valueRight
                    set $ElementsFound++
                end
                if $node._M_right != 0
                    set $node = $node._M_right
                    while $node._M_left != 0
                        set $node = $node._M_left
                    end
                else
                    set $tmp_node = $node._M_parent
                    while $node == $tmp_node._M_right
                        set $node = $tmp_node
                        set $tmp_node = $tmp_node._M_parent
                    end
                    if $node._M_right != $tmp_node
                        set $node = $tmp_node
                    end
                end
                set $i++
            end
            printf "Number of elements found = %u\n", $ElementsFound
        end
        printf "Map size = %u\n", $tree_size
    end
end

document pmap
    Prints std::mapor std::multimapinformation. Works for std::multimap as well.
    Syntax: pmap: Prints map size, if T defined all elements or just element(s) with val(s)
    Examples:
    pmap m - prints map size and definition
    pmap m int int - prints all elements and map size
    pmap m int int 20 - prints the element(s) with left-value = 20 (if any) and map size
    pmap m int int 20 200 - prints the element(s) with left-value = 20 and right-value = 200 (if any) and map size
end


define pmap_member
    if $argc == 0
        help pmap_member
    else
        set $tree = $arg0
        set $i = 0
        set $node = $tree._M_t._M_impl._M_header._M_left
        set $end = $tree._M_t._M_impl._M_header
        set $tree_size = $tree._M_t._M_impl._M_node_count
        if $argc == 1
            printf "Map "
            whatis $tree
            printf "Use pmapto see the elements in the map.\n"
        end
        if $argc == 5
            while $i< $tree_size
                set $value = (void *)($node + 1)
                printf "elem[%u].left: ", $i
                p (*($arg1*)$value).$arg2
                set $value = $value + sizeof($arg1)
                printf "elem[%u].right: ", $i
                p (*($arg3*)$value).$arg4
                if $node._M_right != 0
                    set $node = $node._M_right
                    while $node._M_left != 0
                        set $node = $node._M_left
                    end
                else
                    set $tmp_node = $node._M_parent
                    while $node == $tmp_node._M_right
                        set $node = $tmp_node
                        set $tmp_node = $tmp_node._M_parent
                    end
                    if $node._M_right != $tmp_node
                        set $node = $tmp_node
                    end
                end
                set $i++
            end
        end
        if $argc == 6
            set $idx = $arg5
            set $ElementsFound = 0
            while $i< $tree_size
                set $value = (void *)($node + 1)
                if *($arg1*)$value == $idx
                    printf "elem[%u].left: ", $i
                    p (*($arg1*)$value).$arg2
                    set $value = $value + sizeof($arg1)
                    printf "elem[%u].right: ", $i
                    p (*($arg3*)$value).$arg4
                    set $ElementsFound++
                end
                if $node._M_right != 0
                    set $node = $node._M_right
                    while $node._M_left != 0
                        set $node = $node._M_left
                    end
                else
                    set $tmp_node = $node._M_parent
                    while $node == $tmp_node._M_right
                        set $node = $tmp_node
                        set $tmp_node = $tmp_node._M_parent
                    end
                    if $node._M_right != $tmp_node
                        set $node = $tmp_node
                    end
                end
                set $i++
            end
            printf "Number of elements found = %u\n", $ElementsFound
        end
        printf "Map size = %u\n", $tree_size
    end
end

document pmap_member
    Prints std::mapor std::multimapinformation. Works for std::multimap as well.
    Syntax: pmap: Prints map size, if T defined all elements or just element(s) with val(s)
    Examples:
    pmap_member m class1 member1 class2 member2 - prints class1.member1 : class2.member2
    pmap_member m class1 member1 class2 member2 lvalue - prints class1.member1 : class2.member2 where class1 == lvalue
end


#
# std::set and std::multiset
#

define pset
    if $argc == 0
        help pset
    else
        set $tree = $arg0
        set $i = 0
        set $node = $tree._M_t._M_impl._M_header._M_left
        set $end = $tree._M_t._M_impl._M_header
        set $tree_size = $tree._M_t._M_impl._M_node_count
        if $argc == 1
            printf "Set "
            whatis $tree
            printf "Use psetto see the elements in the set.\n"
        end
        if $argc == 2
            while $i< $tree_size
                set $value = (void *)($node + 1)
                printf "elem[%u]: ", $i
                p *($arg1*)$value
                if $node._M_right != 0
                    set $node = $node._M_right
                    while $node._M_left != 0
                        set $node = $node._M_left
                    end
                else
                    set $tmp_node = $node._M_parent
                    while $node == $tmp_node._M_right
                        set $node = $tmp_node
                        set $tmp_node = $tmp_node._M_parent
                    end
                    if $node._M_right != $tmp_node
                        set $node = $tmp_node
                    end
                end
                set $i++
            end
        end
        if $argc == 3
            set $idx = $arg2
            set $ElementsFound = 0
            while $i< $tree_size
                set $value = (void *)($node + 1)
                if *($arg1*)$value == $idx
                    printf "elem[%u]: ", $i
                    p *($arg1*)$value
                    set $ElementsFound++
                end
                if $node._M_right != 0
                    set $node = $node._M_right
                    while $node._M_left != 0
                        set $node = $node._M_left
                    end
                else
                    set $tmp_node = $node._M_parent
                    while $node == $tmp_node._M_right
                        set $node = $tmp_node
                        set $tmp_node = $tmp_node._M_parent
                    end
                    if $node._M_right != $tmp_node
                        set $node = $tmp_node
                    end
                end
                set $i++
            end
            printf "Number of elements found = %u\n", $ElementsFound
        end
        printf "Set size = %u\n", $tree_size
    end
end

document pset
    Prints std::setor std::multisetinformation. Works for std::multiset as well.
    Syntax: pset: Prints set size, if T defined all elements or just element(s) having val
    Examples:
    pset s - prints set size and definition
    pset s int - prints all elements and the size of s
    pset s int 20 - prints the element(s) with value = 20 (if any) and the size of s
end



#
# std::dequeue
#

define pdequeue
    if $argc == 0
        help pdequeue
    else
        set $size = 0
        set $start_cur = $arg0._M_impl._M_start._M_cur
        set $start_last = $arg0._M_impl._M_start._M_last
        set $start_stop = $start_last
        while $start_cur != $start_stop
            p *$start_cur
            set $start_cur++
            set $size++
        end
        set $finish_first = $arg0._M_impl._M_finish._M_first
        set $finish_cur = $arg0._M_impl._M_finish._M_cur
        set $finish_last = $arg0._M_impl._M_finish._M_last
        if $finish_cur< $finish_last
            set $finish_stop = $finish_cur
        else
            set $finish_stop = $finish_last
        end
        while $finish_first != $finish_stop
            p *$finish_first
            set $finish_first++
            set $size++
        end
        printf "Dequeue size = %u\n", $size
    end
end

document pdequeue
    Prints std::dequeueinformation.
    Syntax: pdequeue: Prints dequeue size, if T defined all elements
    Deque elements are listed "left to right" (left-most stands for front and right-most stands for back)
    Example:
    pdequeue d - prints all elements and size of d
end



#
# std::stack
#

define pstack
    if $argc == 0
        help pstack
    else
        set $start_cur = $arg0.c._M_impl._M_start._M_cur
        set $finish_cur = $arg0.c._M_impl._M_finish._M_cur
        set $size = $finish_cur - $start_cur
        set $i = $size - 1
        while $i >= 0
            p *($start_cur + $i)
            set $i--
        end
        printf "Stack size = %u\n", $size
    end
end

document pstack
    Prints std::stackinformation.
    Syntax: pstack: Prints all elements and size of the stack
    Stack elements are listed "top to buttom" (top-most element is the first to come on pop)
    Example:
    pstack s - prints all elements and the size of s
end



#
# std::queue
#

define pqueue
    if $argc == 0
        help pqueue
    else
        set $start_cur = $arg0.c._M_impl._M_start._M_cur
        set $finish_cur = $arg0.c._M_impl._M_finish._M_cur
        set $size = $finish_cur - $start_cur
        set $i = 0
        while $i< $size
            p *($start_cur + $i)
            set $i++
        end
        printf "Queue size = %u\n", $size
    end
end

document pqueue
    Prints std::queueinformation.
    Syntax: pqueue: Prints all elements and the size of the queue
    Queue elements are listed "top to bottom" (top-most element is the first to come on pop)
    Example:
    pqueue q - prints all elements and the size of q
end



#
# std::priority_queue
#

define ppqueue
    if $argc == 0
        help ppqueue
    else
        set $size = $arg0.c._M_impl._M_finish - $arg0.c._M_impl._M_start
        set $capacity = $arg0.c._M_impl._M_end_of_storage - $arg0.c._M_impl._M_start
        set $i = $size - 1
        while $i >= 0
            p *($arg0.c._M_impl._M_start + $i)
            set $i--
        end
        printf "Priority queue size = %u\n", $size
        printf "Priority queue capacity = %u\n", $capacity
    end
end

document ppqueue
    Prints std::priority_queueinformation.
    Syntax: ppqueue: Prints all elements, size and capacity of the priority_queue
    Priority_queue elements are listed "top to buttom" (top-most element is the first to come on pop)
    Example:
    ppqueue pq - prints all elements, size and capacity of pq
end



#
# std::bitset
#

define pbitset
    if $argc == 0
        help pbitset
    else
        p /t $arg0._M_w
    end
end

document pbitset
    Prints std::bitsetinformation.
    Syntax: pbitset: Prints all bits in bitset
    Example:
    pbitset b - prints all bits in b
end



#
# std::string
#

define pstring
    if $argc == 0
        help pstring
    else
        printf "String \t\t\t= \"%s\"\n", $arg0._M_data()
        printf "String size/length \t= %u\n", $arg0._M_rep()._M_length
        printf "String capacity \t= %u\n", $arg0._M_rep()._M_capacity
        printf "String ref-count \t= %d\n", $arg0._M_rep()._M_refcount
    end
end

document pstring
    Prints std::string information.
    Syntax: pstringExample:
    pstring s - Prints content, size/length, capacity and ref-count of string s
end 

#
# std::wstring
#

define pwstring
    if $argc == 0
        help pwstring
    else
        call printf("WString \t\t= \"%ls\"\n", $arg0._M_data())
        printf "WString size/length \t= %u\n", $arg0._M_rep()._M_length
        printf "WString capacity \t= %u\n", $arg0._M_rep()._M_capacity
        printf "WString ref-count \t= %d\n", $arg0._M_rep()._M_refcount
    end
end

document pwstring
    Prints std::wstring information.
    Syntax: pwstringExample:
    pwstring s - Prints content, size/length, capacity and ref-count of wstring s
end 

#
# C++ related beautifiers (optional)
#

set print pretty on
set print object on
set print static-members on
set print vtbl on
set print demangle on
set demangle-style gnu-v3
set print sevenbit-strings off
  1. 在启动gdb时，输入source [脚本所在位置]/stl_views_1.0.3.gdb来启用这个工具

我将文件放在了~/目录下，启动gdb后，输入以下内容：

source ~/stl_views_1.0.3.gdb

在这里插入图片描述
如果不想每次启动gdb都要手动输入source ~/stl_views_1.0.3.gdb读取脚本，可以将上面stl_views_1.0.3.gdb的内容直接拷贝到.gdbinit文件中，具体操作可以看后面的第二大点

  1. 例如，有一个std::vector类型的data，通过以下命令可以打印出vector的内容
pvector data

在这里插入图片描述
同样的，可以通过pmap，pset，plist…等等来打印STL容器的内容，方便调试。

2 .gdbinit文件

gdb在启动的时候，会在你的当前工作目录下查找 “.gdbinit” 这个文件，并把它的内容作为gdb命令进行解释

  1. 在/home/xxx下添加一个.gdbinit， gdb每次启动时，它都会执行这个文件中的命令来进行初始化。
  2. 下面有一个我认为比较好用的gdb，可以直接拷贝到用户目录下的./gdbinit文件中对gdb进行配置
# 保存历史命令
#set history filename ./.gdb_history
#set history save on
  
# 记录执行gdb的过程
#set logging file ./.log.txt
#set logging on
 
# 退出时不显示提示信息
#set confirm off
 
# 将地址的颜色改成红色
#set style address foreground red
 
# 打印数组的索引下标
set print array-indexes on
 
# 每行打印一个结构体成员
set print pretty on
 
# 退出并保留断点
define qbp
save breakpoints ./.gdb_bp
quit
end
document qbp
Exit and save the breakpoint
end
 
# 保留历史工作断点
define downbp
save breakpoints ./.gdb_bp
end
document downbp
Save the historical work breakpoint
end
 
# 加载历史工作断点
define loadbp
source ./.gdb_bp
end
document loadbp
Load the historical work breakpoint
end
  1. 保存退出后，在该用户下进行gdb调试，就会自动启用.gdbinit文件中的这些配置啦

你是否还在寻找稳定的海外服务器提供商？创新互联www.cdcxhl.cn海外机房具备T级流量清洗系统配攻击溯源，准确流量调度确保服务器高可用性，企业级服务器适合批量采购，新人活动首月15元起，快前往官网查看详情吧


分享题目：【gdb配置】打印stl容器，.gdbinit文件-创新互联
网站URL：http://cdkjz.cn/article/cspphp.html
返回首页 了解更多建站资讯

相关资讯

多年建站经验

多一份参考，总有益处

联系快上网，免费获得专属《策划方案》及报价

咨询相关问题或预约面谈，可以通过以下方式与我们联系

大客户专线   成都：13518219792   座机：028-86922220

在线咨询 提交需求
友情链接 交换友情链接
西部信息服务器托管成都西信服务器托管手机网站建设公司做网站设计成都网站建设中国（西部）云计算中心美美搬家App开发服务器托管免备案虚拟主机

成都网站建设公司地址：成都市青羊区太升南路288号锦天国际A座10层 建设咨询028-86922220

成都快上网科技有限公司-四川网站建设设计公司 | 蜀ICP备19037934号 Copyright 2020,ALL Rights Reserved cdkjz.cn | 成都网站建设 | © Copyright 2020版权所有.

专家团队为您提供成都网站建设,成都网站设计,成都品牌网站设计,成都营销型网站制作等服务,成都建网站就找快上网！ | 成都网站建设哪家好？ | 网站建设地图